Input a design moment, steel grade, and safety factor and this tool will calculate a corresponding section modulus value.
Please note that this result is calculated using design moment only and no other engineering factors. For more information on calculating section modulus and design moment please see our article: Design and Calculations.
The US Army Corps of Engineers recommends a safety factor of .50
in their publication Design of Sheet Pile Walls, section 6-3 (Design of Sheet Piling).
Our business is to help you find and buy a better and more efficient SSP system that meets your needs for less money!
The best way for us to help you is to get a dialog going, which can include the following:
A) Share job details as specified in remarks section below
B) Sharing desired lifespan of the system
C) Designating an environment the project will be installed in, for example fresh water bulkhead or a salt water port
D) Providing a Bending Moment OR alternatively, a Section Modulus and steel grade or the specific ssp section that may be specified
So please fill out the form below with details to the best of your knowledge, and our staff will contact you for a confidential, 1-on-1 consultation or contact us directly: 866.666.7453 or +1.512.243.1228 or email@example.com