
Product ID O-Pile 49-1240 Available steel grade options: A 252 Grade 1 \| A 252 Grade 2 \| A 252 Grade 3 \| A 572 Grade 50 \| A 572 Grade 55 \| A 572 Grade 60 \| A 572 Grade 65 \| x70 \| x80

DOWNLOAD AUTOCAD KIT
ORDER LARGE BLACK BOOK

Primary SSP Specifications
bending moment capacity
steel grade
interlock strength	3,413.3 kN/m
weight	193.9 kg/m² *
panel weight	240.5 kg/m *
section modulus	4,887.3 cm³/m *
moment of inertia	223,448.1 cm⁴/m *
connector ratio	100 % Custom % 95%
panel width	1,240.4 mm
profile depth	914.4 mm

Primary Design Criteria
steel grade
safety factor
availability	4 weeks

components
king pile	914mm x 9.53mm
intermediate pile	914mm x 9.53mm

Complimentary Connectors
go to www.pilepro.com

Country of origin

USA

Sold by

Sheet Pile LLC

Combined Sheet Pile Tool

Continuous O-Pile Tool

Sheet Pile Cost Estimating Tool

Enter Wall length, Wall height and exposed Wall height then select products.

Design Moment Tool

Input a design moment, steel grade, and safety factor and this tool will calculate a corresponding section modulus value.

Please note that this result is calculated using design moment only and no other engineering factors. For more information on calculating section modulus and design moment please see our article: Design and Calculations.

design moment kN-m/m

steel grade

safety factor

Quantity Converter

This tool is in maintenance, sorry. Please try later.

Steel vs Concrete Tool

Enter your wall dimensions and the values below will adjust automatically.

This tool is in maintenance, sorry. Please try later.

Advance Search Settings

bending moment capacity parameters

Safety factor Product type Steel grade

manufacturing parameters

Steel sheet pile sections that are 100% melted, manufactured in the USA Melted and manufactured in USA Doensn't matter Show manufactured solutions only Yes No

interlock parameters

Search by interlock type

sheet pile selection parameters

Search by minimum thickness of the sheet pile section only: Exclude cold formed sections Yes No Show only Z-Pile sections Yes No

combi-wall parameters

Show combi-walls Yes No Show only combi-wall solutions Yes No Show only combi-wall solutions with beams Yes No Show only combi-wall solutions with piles Yes No

other search parameters

Show only O-Pile systems, both combined and continuous Yes No Show only ArcelorMittal systems Yes No Show only Gerdau systems Yes No Show only Roll Form Group systems Yes No

corrosion parameters

Eurocode Caltrans Custom

ALL OPTIONS MUST BE FILLED OUT

ENTER PARAMETERS:
Wall length m	Wall height m	Exposed wall height m

Buy America
exclude cold formed sections
manufacturer-listed solutions only
interlock
minimum thickness
include combi walls

ENTER PARAMETERS:
Wall length m	Wall height m	Exposed wall height m

Name (required)	Email (required)
Phone:	Notes:

Country of origin

Sold by

Combined Sheet Pile Tool

Sponsored by PilePro®

Continuous O-Pile Tool

Sponsored by O-Pile®

Sheet Pile Cost Estimating Tool

Design Moment Tool

Quantity Converter

Steel vs Concrete Tool

Sheet Pile Cost Estimating Tool

Upload your project for a free consultation

Your project is being uploaded. Please, don't close this tab/window.

Your project has been uploaded. We will contact you shortly.

Form submit failed. Try again.

Your project description has been sent, but some of the attachments could not be loaded. We will contact you shortly.

Choose file